Lesson Overview
Here's the good news: about 80% of what's in your van right now works on boats. Your polishers, your pads, your pressure washer, your microfiber, your process discipline, your ability to look at a panel and see what's wrong with it. All of it transfers.
Here's the part that costs people money: the other 20% is where boats are won or lost. Gelcoat is not clearcoat. It's a different material with a different failure mode, a different heat tolerance, and roughly eight to ten times the thickness, which means it's more forgiving in one way and far less forgiving in another. Then there are five or six surfaces on a boat that simply do not exist on a car: non-skid, teak, clear vinyl enclosures, canvas, stainless that bleeds rust, and bare aluminum pontoons. And then there's the environment: you're working over water, on a dock, at height, sometimes without a hose, often under a marina's rules about what can run off your pad.
This lesson covers three things in order: the material (what gelcoat actually is and how it fails), the surfaces and the workflow (the correct sequence for a boat, and why it isn't the car sequence), and the kit (what to buy, what not to buy, and in what priority).
By the end you'll be able to walk up to a boat, identify every substrate on it, name the products each one needs, and estimate the job in hours instead of guessing.
What you'll be able to do after this lesson
Explain the difference between gelcoat and clearcoat, and identify which one you're standing in front of
Recognize painted boats, metal-flake gelcoat, and factory-coated finishes before you touch them
Run a correct marine wash-and-detail sequence from assessment to relaunch
Identify and safely treat the surfaces unique to boats: non-skid, teak, vinyl, canvas, eisenglass, stainless, aluminum, SeaDek
Build a three-tier equipment kit and know which tier your market actually requires
Quote a boat job in hours using a defensible labor model